Can the configuration for different devices be saved?

Last Modified: 3rd Jan 2013
Category: Laboratory Applications > CE-Wedge
Platform: All
Version: 1
Article Ref.: 7C2A
»Return to previous search
»Print friendly version of this article.
1 person has found this article useful.

CE-Wedge 7C2A CE-Wedge always uses whatever parameters were set in it the last time that it was used. You cannot create different configuration files and save them to different files. The program is really just a stripped down version that only provides a subset of the features in our WinWedge program. It was primarily designed to be used as an interface for the most simple types of serial devices like bar code scanners, electronic scales and simple measuring tools like calipers and gauges. The ability to save different configuration files was left out primarily because the program is so easy to configure. If you need to switch the configuration for a different device you can simply select different options in the program's window. Because there are so few options this should be fairly simple. Configuration CEWedge All 1 en Measurement

If you can't find a solution on the Knowledge Base then please contact us on the Technical Support Request Form or by email or by telephone on +44 (0) 203 695 7810

For the time being we are unable to offer the following product ranges although we are currently working hard to increase the number of products we can offer in the future. Please contact us to talk about alternative products that we may be able to offer you.