Error code 41: "This function cannot be used with this board."

Last Modified: 3rd Jan 2013
Category: Data Acquisition > Universal Library for LabVIEW v6.0 - 7.1 (UL)
Platform: All
Version: All
Article Ref.: 13D1E
»Return to previous search
»Print friendly version of this article.
1 person has found this article useful.

Universal Library (UL) 13D1E This indicates that a function is being called which is not supported by the type of board specified. This error often occurs when the board number defined does not correspond to the board that you wish to use. For example, when Instacal is installed, the default is for a virtual board called the "Demo Board" to be assigned to board 0. The example Universal Library programs contain the line BoardNumber%=0 or similar, which sets the value of the Board Number used by the functions. This line should be edited to contain the Board Number of your hardware. To find the Board Number of your hardware open Instacal, where the boards are listed with the board number assigned by Instacal. For example, in the list below, the PCI-DAS6035 card has Board Number 1. Error Messages UniversalLibraryforLabVIEWv6071UL All All en All

If you can't find a solution on the Knowledge Base then please contact us on the Technical Support Request Form or by email or by telephone on +44 (0) 203 695 7810

For the time being we are unable to offer the following product ranges although we are currently working hard to increase the number of products we can offer in the future. Please contact us to talk about alternative products that we may be able to offer you.