VisSim UDP Receive Dialogue
|
VisSim/UDP lets you read and write standard UDP internet packets from
the VisSim block diagram via UDP read/write blocks. VisSim/UDP lets you
determine the packet layout by allowing you to specify the byte offset
and datatype of each element. You can choose 8-, 16-, or 32-bit signed
and unsigned integer; 4- and 8-byte floats; and 16- or 32-bit scaled
integers. You can use VisSim/UDP for remote sensing, data exchange or
remote control. You can easily log data, plot, strip chart or run a
virtual plant or controller for model based development.
To exchange UDP data with VisSim, you must have an internet connection,
either wired or wireless. Then just insert and wire UDP Read and/or UDP
Write blocks into a diagram and click the Go button. You can transmit
and receive from any number of different IP addresses in a single
diagram. The UDP Read and UDP Write blocks let you read data from and
write data to UDP ports. Data types and byte offset within the data
packet can be quickly modified through the dialog boxes for these
blocks.
Hardware Features
- Low cost - uses existing ethernet ports on PC
- Reliable
- Easy to use
- Installs in seconds
Software Features
- User selection of up to 256 offsets into the data packet brought out to block pins
- User-set packet data length
- Exchange data between VisSim and any ethernet device
- Data types include signed and unsigned 1, 2, and 4 bytes integers, 4 and 8 byte floats
- Display data exchange status
- Connect to multiple IP addresses and UDP ports
- Receive pin indicates receipt of message
- Transmit enable pin controls transmit timing
Downloads
Download the VisSim/UDP add-on Demo
VisSim Version 8 Download (Free Trial)
RSS Feeds
VisSim/Real-TimePRO
