solidThinking Embed

solidThinking Embed (formerly known as VisSim Embedded) is a visual environment for model based development of embedded systems. Its highly efficient diagram-to-code capability shortens the development time and increases product quality.

With solidThinking Embed, you can quickly develop virtual prototypes of any dynamic system. Models are built by simply sliding blocks into the work area and wiring them together with the mouse.

Embed automatically converts the control diagrams into C-code ready to be downloaded to the target hardware. The generated C-code is recognized for its efficiency with respect to memory requirements and runtime.

solidThinking Embed represents a new era of VisSim for efficient model-based embedded development including new packaging aimed at providing more functionality with simplified configuration and installation.

Similar to previous versions, there are two main products:

  • solidThinking Embed SE (Simulation Edition) replacing Professional VisSim
  • solidThinking Embed replacing VisSim Embedded (Includes Embed SE)

The number of add-ons have been reduced to two:

  • solidThinking Embed.Digital Power Designer
  • solidThinking Embed/Comm

Many more capabilities are now available within the main products:

  • Frequency Domain Analysis and Linearization
  • Generalized reduced gradient method of parameter optimization
  • Electric motor and controller block set (floating point)
  • UML 2 state transition diagram editor to simulate event-driven systems
  • Real-time data monitoring with CAN, OPC, real-time data acquisition boards, serial, and UDP
  • Support for solidThinking Compose Open Matrix Language
  • Enhanced support for Texas Instruments TI F28377D
  • Faster and more efficient code generation

 

BENEFITS OF SOLIDTHINKING EMBED

Rapid Development of Control Systems

solidThinking Embed provides a complete toolchain for the development of embedded control systems covering Software-in-the-Loop, Processor-in-the-Loop as well as Hardware-in-the-Loop simulations. You can make changes to a control diagram, and compile and download it to the target MCU in seconds. Then, while the system is operating, you can interactively update the control parameters. Using powerful data logging, buffering, and digital scoping blocks, you can gain insight into the control algorithms deployed on the target MCU in real time.

No Hand-Coding Required!

Turning control diagrams into executable, real-time capable code used to require an experienced embedded software developer. With solidThinking Embed’s code generator a control design engineer can easily try out new algorithms on a target hardware without the need of hand-coding.

Affordable & Easily Configurable Development Environment

The basic configuration of solidThinking Embed is packaged with most of the tools needed for embedded development including state charts, target support, fixed point algorithms, efficient code generators, motor control libraries, and a lot more. This results in an affordable and easy configurable development environment.

CAPABILITIES OF EMBED 2017

Model Based Embedded Development

Block Diagram Environment

High level Diagrams

Motion Control Block Library

Comprehensive Modeling

Simulation of Dynamic Systems

Data Filters

Debugging

Visualization

Statecharts

Analysis & Linearization

Optimization

Real-Time Data Monitoring & Acquisition

Exchange data with PCAN USB CAN device

Connect to OPC server for data logging and offline tuning

Interface to analog and digital I/O boards and devices from National Instruments and Measurement Computing

Exchange data with any RS-232 device

Exchange data with any Ethernet device

Code Generation

 

WHAT’S NEW IN EMBED 2017

End-to-end Communication System Design With Embed/Comm module

solidThinking Embed/Comm, lets you model end-to-end communication systems at the signal or physical level. With its full complement of communication blocks and powerful, time-domain simulation engine, Embed/Comm provides fast and accurate solutions for analog, digital, and mixed-mode communication systems.

 

solidThinking Embed/Comm supports modeling PCCC Turbo Codes. It also supports simulating 802.11a/b/g, Bluetooth, generic, and ultra wide-band designs.

Simulation & Code Generation of Power Supply & Digital Power Controls Using Embed/Digital Power Designer Module

solidThinking Embed/Digital Power Designer provides high-level blocks for simulation and code generation of power supply and digital power components and controls. Embed/Digital Power Designer blocks let you develop a working controller that can be directly downloaded to the MCU for digital power applications.

 

solidThinking Embed/Digital Power Designer blocks efficiently model analog power supply configurations along with control loops, to simulate and verify the control loop without the need for hardware. This allows you to develop your control routines more flexibly, simulate, verify and make any need correction before sending out Gerbers to manufacture hardware. When your hardware arrives, you can use Embed/Digital Power Designer to compile and download the diagram to the MCU and test your real hardware.

Support For Texas Instruments F28062F

Embed 2017 supports code generation for Texas Instruments F28062F (Piccolo Microcontroller with InstaSPIN-FOC).

The Next Steps

What do our Customers say about us?

Thank you for your very efficient and prompt help. It is a pleasure to do business with switched-on companies like yours. Thanks to you I have ordered the product today via your WebStore.

DM, Tain, UK

“I am very satisfied with Origin. I think Origin is an excellent plotting tool. Its capabilities are vast, diverse, and beyond my needs. I appreciate the fact that almost anything on a plot can be adjusted according to a desired preference.”

Matthew D. Sena - Sandia National Laboratories

This was an excellent course which I feel sure will be extremely useful. I will certainly recommend the course to others. Tutor made the course very enjoyable. A born teacher – superb communicator

HP, Evesham, UK

We are at a loss to know how to express our admiration….outstandingly good in respects of all aspects of what is on offer from Adept Scientific.

EW Billington, Wentworth, Cambs, UK

Adept Products

For the time being we are unable to offer the following product ranges although we are currently working hard to increase the number of products we can offer in the future. Please contact us to talk about alternative products that we may be able to offer you.