UEILogger
High Performance Data Loggers/Recorders
 UEILogger
Highlights
- Flexible. Select the I/O required to match your application
- Up to
150 analog or 288 digital I/O per logger
- Easy-to-use, intuitive Windows
setup
- Uses standard SD card (2 Gbyte card included holds up to 500 million
samples)
- Sample up to 100 samples per second PER CHANNEL
- Rugged: tested -40
to +85°C, 5g Vibration, 50g shock
- Compact:
- UEILogger 300 (3 I/O slots) 4” x 4.1” x 4.0”
- UEILogger
600 (6 I/O slots) 4” x 4.1” x 5.8”
- Extremely
cost effective
- AC, DC or battery powered
- Program logger via Ethernet or program stored on SD card.
- Logging
may be started and stopped via CAN-bus command.
- Ideal replacement for
standard paper chart recorders.
General Description
The UEILoggerTM is a powerful, rugged, flexible and easy-to-use data
logger (or data recorder) suitable for use in a wide variety of applications.
Based upon UEI’s popular PowerDNA family it uses the same DNA series
I/O boards. The UEILogger maintains all of the PowerDNA’s flexibility
and adds a powerful standalone data logging/recording capability.
Each Data Logger Cube contains the Logger “engine” as well
as either 3 (UEILogger 300) or 6 (UEILogger 600) I/O slots. Configure
your data logger by selecting the I/O boards required to match your application.
With over 20 different I/O boards available, there’s sure to be
a configuration to meet your needs.
The UEILogger supports sample rates up to 100 samples per second on
each I/O channel or port. Data is logged onto standard SD Cards (2 Gig
SD Card included) and may be retrieved via the unit’s Ethernet
port or the directly from the SD Card using a standard SD Card reader.
The 2 Gig SD Card included will hold over 500 million 16-bit A/D readings.
The intuitive, Windows-based software provided configures the data logger
and extracts the data from the SD Card. There is absolutely no programming
required. The software allows you to set input and output ranges, sample/update
rates, signal conditioning, etc. all from simple pull down menus. The
data logging “program” may be downloaded via the unit’s
standard Ethernet port or stored on the SD Card.
Logging applications may be started and stopped Via Ethernet command,
On power up, Start/Stop button, Real-time clock/calendar, Sync connector
input, or based upon an analog input. The UEILogger cube may be placed
on a desk or table or may be mounted to a wall, DIN Rail or in a standard
19” rack. The UEILogger may be AC, DC or battery powered.
|
