100 k samples/sec throughput (200 kHz single channel)
4096 sample FIFO
Dual 16-bit D/A converters
4 bits of Digital I/O
Resettable fuse on +5 VDC
Rugged 50-pin connector
Fully Plug-and-Play
Analog Specifications
** Analog Input**
Resolution: 16 bits
A/D Conversion Time: 5 µs
Accuracy: ±4.5 LSB typ, ±5.0 LSB max. (Software Calibrated)
Throughput
(Post-process Calibration) 100 kHz multi-channel
200 kHz single channel
Burst Mode Transfer Rate: 100 kHz
Number of channels: 8 differential or 16 single-ended
Input Ranges: ±10V, ±5V, ±2.5V, or ±1.25V
Data transfer modes: REP-INSW, interrupt, or software polled.
Common Mode Range: ±10V
CMRR @ 60 Hz: –76dB
Maximum Input Voltage: +55V, –40V
**Analog Output**
Resolution: 16 bits
Number of Channels: Two single-ended voltage outputs
Range: ±10 V
Current Drive: ±2 mA
Accuracy: ±10.0 LSB typ, ±12.0 LSB max
Output short-circuit: Indefinite @ 12 mA
Digital Specifications
Digital Type: FPGA
Number of channels: 1 ports of 4 bits programmable
by port as 4 inputs or 4 outputs
Input High: 2.0 Volts min, (5.5 Volts absolute max)
Input Low: 0.8 Volts max, (–0.5 volts absolute min)
Output High: 3.86 Volts (IOH = –4 mA)
Output Low: 0.5 Volts (IOL = 4 mA)
Interrupts Programmable: levels 2 to 15
Interrupt Enable: Programmable
Interrupt Sources: End-of-Conversion, FIFO Half-full,
external (Ext Int)
Counter/Pacer
Type: 82C54
Configuration: Three down-counters, 16 bits each
Counter 1 - User-controlled
Counter 2 - ADC Lower Divider
Counter 3 - ADC Upper Divider & User
Clock Frequency: 10 MHz Crystal-Controlled
Software Description
Includes InstaCal ® , installation, calibration and test software. Supported by UniversalLibrary ®. Also supported by a wide variety of applications software packages including SoftWIRETM, DAS-WizardTM, HP VEE®, HP VEE Lab, LabView®, and most other third party, high-level data acquisition programs.
All other questions about our Data Acquisition? 
