http://www.adeptscience.co.uk/media_room Welcome to the Adept Scientific Press Room Wed, 06 Feb 2013 16:31:43 +0000 en-US hourly 1 http://wordpress.org/?v=3.5 http://www.adeptscience.co.uk/media_room/2012/10/11/clearly-an-ardent-endnote-fan-good-job-for-writing-final-year-thesis/ http://www.adeptscience.co.uk/media_room/2012/10/11/clearly-an-ardent-endnote-fan-good-job-for-writing-final-year-thesis/#comments Thu, 11 Oct 2012 08:56:07 +0000 admin http://www.adeptscience.co.uk/media_room/?p=4894
Miss Jodie A. Symington, EngD Research Student, Newcastle University]]> http://www.adeptscience.co.uk/media_room/2012/10/11/clearly-an-ardent-endnote-fan-good-job-for-writing-final-year-thesis/feed/ 0 http://www.adeptscience.co.uk/media_room/2012/07/29/when-students-come-to-the-course-they-have-weak-notions-of-functions-and-equations/ http://www.adeptscience.co.uk/media_room/2012/07/29/when-students-come-to-the-course-they-have-weak-notions-of-functions-and-equations/#comments Sun, 29 Jul 2012 14:24:52 +0000 admin http://www.adeptscience.co.uk/media_room/?p=4842
Maple helps them investigate the maths and get a better understanding not just of the results, but of the process as well.” Professor Roger Kraft, Purdue University Calumet]]> http://www.adeptscience.co.uk/media_room/2012/07/29/when-students-come-to-the-course-they-have-weak-notions-of-functions-and-equations/feed/ 0 http://www.adeptscience.co.uk/media_room/2012/06/22/quansers-rapid-prototyping-software/ http://www.adeptscience.co.uk/media_room/2012/06/22/quansers-rapid-prototyping-software/#comments Fri, 22 Jun 2012 13:55:28 +0000 admin http://www.adeptscience.co.uk/media_room/?p=4838
and control hardware sped the development of the RiceWrist, a device to help rehabilitate people with spinal-cord injuries. Thanks to the Quanser hardware and software, our process could be iterative and produce the best output possible in a short amount of time.” Dr Marcis O’Malley, Rice University]]> http://www.adeptscience.co.uk/media_room/2012/06/22/quansers-rapid-prototyping-software/feed/ 0 http://www.adeptscience.co.uk/media_room/2012/06/20/mathcads-contributed-functions-for-handling-simultaneous-equations-make-very-short-work-of-the-process/ http://www.adeptscience.co.uk/media_room/2012/06/20/mathcads-contributed-functions-for-handling-simultaneous-equations-make-very-short-work-of-the-process/#comments Wed, 20 Jun 2012 14:11:55 +0000 admin http://www.adeptscience.co.uk/media_room/?p=4803
Dr Ken Bray, a theoretical physicist and a Senior Visiting Fellow in the Faculty of Engineering and Design at the University of Bath, UK]]> http://www.adeptscience.co.uk/media_room/2012/06/20/mathcads-contributed-functions-for-handling-simultaneous-equations-make-very-short-work-of-the-process/feed/ 0 http://www.adeptscience.co.uk/media_room/2012/06/10/i-wanted-to-engage-in-outreach-activities-and-earthquake-engineering/ http://www.adeptscience.co.uk/media_room/2012/06/10/i-wanted-to-engage-in-outreach-activities-and-earthquake-engineering/#comments Sun, 10 Jun 2012 13:48:36 +0000 admin http://www.adeptscience.co.uk/media_room/?p=4835
specifically targeting younger middle school studentts…Quanser had already created it and the device was ideal.” Dr Anthony Ingraffea, Professor at the Cornell School of Civil and Environmental Engineering, Cornell University]]> http://www.adeptscience.co.uk/media_room/2012/06/10/i-wanted-to-engage-in-outreach-activities-and-earthquake-engineering/feed/ 0 http://www.adeptscience.co.uk/media_room/2012/05/23/i-have-used-software-aids-for-spectroscopic-calculations-since-the-early-days-of-personal-computing/ http://www.adeptscience.co.uk/media_room/2012/05/23/i-have-used-software-aids-for-spectroscopic-calculations-since-the-early-days-of-personal-computing/#comments Wed, 23 May 2012 11:18:40 +0000 admin http://www.adeptscience.co.uk/media_room/?p=4719
…and when SPECTRACALC (the first version of GRAMS) was introduced, I adopted it straight away – and have used the various versions of the software ever since.” H F (Gus) Shurvell, Emeritus Professor of Chemistry and Adjunct Professor in the Art Conservation Program at Queen’s University, Kingston, Ontario]]> http://www.adeptscience.co.uk/media_room/2012/05/23/i-have-used-software-aids-for-spectroscopic-calculations-since-the-early-days-of-personal-computing/feed/ 0 http://www.adeptscience.co.uk/media_room/2012/05/23/the-intuitive-nature-of-maplesim-allowed-my-team-to-create-high-fidelity-models-in-a-short-period-of-time/ http://www.adeptscience.co.uk/media_room/2012/05/23/the-intuitive-nature-of-maplesim-allowed-my-team-to-create-high-fidelity-models-in-a-short-period-of-time/#comments Wed, 23 May 2012 10:57:01 +0000 admin http://www.adeptscience.co.uk/media_room/?p=4716
This [MapleSim] played a vital role in the success of this modular HIL test platform which allowed component testing, power level estimation, as well as validation of power management and path planning algorithms.” Dr Amir Khajepour, Canada Research Chair in Mechatronic Vehicle Systems and Professor of Engineering in the Mechanical and Mechatronics Engineering Department at [...]]]> http://www.adeptscience.co.uk/media_room/2012/05/23/the-intuitive-nature-of-maplesim-allowed-my-team-to-create-high-fidelity-models-in-a-short-period-of-time/feed/ 0 http://www.adeptscience.co.uk/media_room/2012/05/12/the-depth-of-questions-possible-with-maple-t-a/ http://www.adeptscience.co.uk/media_room/2012/05/12/the-depth-of-questions-possible-with-maple-t-a/#comments Sat, 12 May 2012 13:43:54 +0000 admin http://www.adeptscience.co.uk/media_room/?p=4831
and the Maple engine is what I consider its biggest strength.” Phillipa Williams, Department of Mathematics and Statistics, University of Canterbury]]> http://www.adeptscience.co.uk/media_room/2012/05/12/the-depth-of-questions-possible-with-maple-t-a/feed/ 0 http://www.adeptscience.co.uk/media_room/2012/05/02/i-have-had-previous-experience-with-dasylab-and/ http://www.adeptscience.co.uk/media_room/2012/05/02/i-have-had-previous-experience-with-dasylab-and/#comments Wed, 02 May 2012 13:38:30 +0000 admin http://www.adeptscience.co.uk/media_room/?p=4828
know that it [DASYLab] has the flexibility to facilitate basic and higher level tasks.” Steve Hollis, Course Tutor, Wigan and Leigh College]]> http://www.adeptscience.co.uk/media_room/2012/05/02/i-have-had-previous-experience-with-dasylab-and/feed/ 0 http://www.adeptscience.co.uk/media_room/2012/03/28/however-much-or-little-detail-is-provided-with-the-clip/ http://www.adeptscience.co.uk/media_room/2012/03/28/however-much-or-little-detail-is-provided-with-the-clip/#comments Wed, 28 Mar 2012 11:45:06 +0000 admin http://www.adeptscience.co.uk/media_room/?p=4641
EndNote can file it away along with its URL or even a local video copy and retrieve it in searches for particular musicians’ names, composers, arrangers, companies, venues, or anything else.” Dr Cormac Newark, Senior Lecturer in Music at the University of Ulster, Magee Campus]]> http://www.adeptscience.co.uk/media_room/2012/03/28/however-much-or-little-detail-is-provided-with-the-clip/feed/ 0 http://www.adeptscience.co.uk/media_room/2012/03/28/maplesim-was-an-eye-opener-for-us/ http://www.adeptscience.co.uk/media_room/2012/03/28/maplesim-was-an-eye-opener-for-us/#comments Wed, 28 Mar 2012 11:40:35 +0000 admin http://www.adeptscience.co.uk/media_room/?p=4637
It gave us insights that we would otherwise not have had.  We discovered behaviours in the system we hadn’t taken into account until we ran MapleSim simulations.  We learned a lot about the system using MapleSim.” Dr Jacob Apkarian, Founder and CTO of Quanser]]> http://www.adeptscience.co.uk/media_room/2012/03/28/maplesim-was-an-eye-opener-for-us/feed/ 0 http://www.adeptscience.co.uk/media_room/2012/03/28/i-was-very-impressed-with-how-little-time-it-took-us-to/ http://www.adeptscience.co.uk/media_room/2012/03/28/i-was-very-impressed-with-how-little-time-it-took-us-to/#comments Wed, 28 Mar 2012 11:37:07 +0000 admin http://www.adeptscience.co.uk/media_room/?p=4635
configure a high-fidelity model using MapleSim.” Derry Crymle, Lead Engineer for the QBall-X4 project]]> http://www.adeptscience.co.uk/media_room/2012/03/28/i-was-very-impressed-with-how-little-time-it-took-us-to/feed/ 0 http://www.adeptscience.co.uk/media_room/2012/03/16/ive-been-using-mathcad-since-1995-and-i-really-love-using-it-because-it-is-the-most-optimal-engineering-tool/ http://www.adeptscience.co.uk/media_room/2012/03/16/ive-been-using-mathcad-since-1995-and-i-really-love-using-it-because-it-is-the-most-optimal-engineering-tool/#comments Fri, 16 Mar 2012 12:18:25 +0000 admin http://www.adeptscience.co.uk/media_room/?p=4624
Thanks to Mathcad, I’ve been able to do things on engineering, maths and geometry tools that were simply not possible with other tools. The unit awareness is simply brilliant.” Bert Beirinckx, Senior Technology Engineer, Belgium]]> http://www.adeptscience.co.uk/media_room/2012/03/16/ive-been-using-mathcad-since-1995-and-i-really-love-using-it-because-it-is-the-most-optimal-engineering-tool/feed/ 0 http://www.adeptscience.co.uk/media_room/2012/03/16/greater-flexibility-ease-of-use-an-intuitive-layout/ http://www.adeptscience.co.uk/media_room/2012/03/16/greater-flexibility-ease-of-use-an-intuitive-layout/#comments Fri, 16 Mar 2012 12:17:19 +0000 admin http://www.adeptscience.co.uk/media_room/?p=4622
powerful computational tools, and many other great features make Mathcad Prime 2.0 superior to previous generations.” Brian Lumb, Senior Mechanical Engineer, Instrumentation Laboratory]]> http://www.adeptscience.co.uk/media_room/2012/03/16/greater-flexibility-ease-of-use-an-intuitive-layout/feed/ 0 http://www.adeptscience.co.uk/media_room/2012/03/16/every-engineer-and-mathematics-oriented-professional-should-consider/ http://www.adeptscience.co.uk/media_room/2012/03/16/every-engineer-and-mathematics-oriented-professional-should-consider/#comments Fri, 16 Mar 2012 12:15:45 +0000 admin http://www.adeptscience.co.uk/media_room/?p=4620
[Mathcad] a standard work tool.” Computer Shopper]]> http://www.adeptscience.co.uk/media_room/2012/03/16/every-engineer-and-mathematics-oriented-professional-should-consider/feed/ 0 http://www.adeptscience.co.uk/media_room/2012/03/16/if-you-are-looking-to-save-engineering-hours-by-standardising-your-company-reports-with-clearly-defined-calculations-and-professional-formatting/ http://www.adeptscience.co.uk/media_room/2012/03/16/if-you-are-looking-to-save-engineering-hours-by-standardising-your-company-reports-with-clearly-defined-calculations-and-professional-formatting/#comments Fri, 16 Mar 2012 12:08:44 +0000 admin http://www.adeptscience.co.uk/media_room/?p=4618
…look no further than Mathcad Prime 2.0. [It] is faster, more powerful and incorporates many more features from the past versions that we’ve grown to love.” Gnouni Yengoian, Design Engineer, California]]> http://www.adeptscience.co.uk/media_room/2012/03/16/if-you-are-looking-to-save-engineering-hours-by-standardising-your-company-reports-with-clearly-defined-calculations-and-professional-formatting/feed/ 0 http://www.adeptscience.co.uk/media_room/2011/12/08/in-one-week-i-installed-quarc/ http://www.adeptscience.co.uk/media_room/2011/12/08/in-one-week-i-installed-quarc/#comments Thu, 08 Dec 2011 13:10:34 +0000 admin http://www.adeptscience.co.uk/media_room/?p=4614
took the interactive tutorial available online from Quanser and used QUARC successfully to do rapid prototyping of the experiment.” Dr Aman Behal, Assistant Professor in Electrical Engineering, Unversity of Central Florida]]> http://www.adeptscience.co.uk/media_room/2011/12/08/in-one-week-i-installed-quarc/feed/ 0 http://www.adeptscience.co.uk/media_room/2011/12/08/i-spoke-with-people-who-had-these-devices-in-their-labs/ http://www.adeptscience.co.uk/media_room/2011/12/08/i-spoke-with-people-who-had-these-devices-in-their-labs/#comments Thu, 08 Dec 2011 13:01:42 +0000 admin http://www.adeptscience.co.uk/media_room/?p=4609
and discovered that those who used Quanser’s Haptic Wand were extremely pleased with their equipment.” Dr Daniela Constantinescu, University of Victoria, British Columbia]]> http://www.adeptscience.co.uk/media_room/2011/12/08/i-spoke-with-people-who-had-these-devices-in-their-labs/feed/ 0 http://www.adeptscience.co.uk/media_room/2011/10/18/maple-t-a-has-made-a-huge-difference-to-us-on-many-levels-2/ http://www.adeptscience.co.uk/media_room/2011/10/18/maple-t-a-has-made-a-huge-difference-to-us-on-many-levels-2/#comments Tue, 18 Oct 2011 12:51:39 +0000 admin http://www.adeptscience.co.uk/media_room/?p=4602
We can offer an appropriate number of assignments without being overwhelmed… In addition, after moving to Maple T.A., we’ve found that we can save approximately $100,000 per year on our grading budget…” Carrie Howells, Instructional Support Coordinator for the Mathematics Faculty Computing Facility, University of Waterloo]]> http://www.adeptscience.co.uk/media_room/2011/10/18/maple-t-a-has-made-a-huge-difference-to-us-on-many-levels-2/feed/ 0 http://www.adeptscience.co.uk/media_room/2011/10/18/maplesim-models-have-fewer-equations-than-others/ http://www.adeptscience.co.uk/media_room/2011/10/18/maplesim-models-have-fewer-equations-than-others/#comments Tue, 18 Oct 2011 12:43:56 +0000 admin http://www.adeptscience.co.uk/media_room/?p=4597
Its symbolic approach takes care of the grunt work and computes quickly.  It’s [MapleSim] all that we’re looking for in a tool.” Ryan Gariepy, CTO, Clearpath Robotics]]> http://www.adeptscience.co.uk/media_room/2011/10/18/maplesim-models-have-fewer-equations-than-others/feed/ 0