VisSim™ Embedded Controls Developer supports TI C2834x Digital Signal Controllers
Visual Solutions Incorporated’s (VSI) (Westford, Massachusetts) VisSim/ECD Version 7.0 with support for Texas Instruments’ (TI) TMS320C2834x “Delfino” floating-point digital signal controllers (DSCs) is now available from Adept Scientific (Letchworth, Herts).
Providing 600 million floating point instructions per second (MFLOPS) performance at 300 MHz, the C2834x devices bring higher performance and simpler software development to embedded applications such as industrial control, medical devices, digital power conversion and advanced sensing. Version 7.0 of VisSim/ECD adds support for the C2834x series to its existing support of all previous F28xx controllers.
VisSim/ECD allows developers to program the C2834x DSC without writing a single line of code by easily constructing block diagrams to form DSC algorithms. With blocks to support standard maths and signal processing operations, as well as all of the on-chip peripherals of the C2834x controllers, programming for TI DSCs is now easier than ever.
The ability to simulate algorithms on the PC allows offline troubleshooting and optimisation, shortening development time by a factor of 2 or more and removing the need for a dedicated programmer. VisSim/ECD’s advanced code generator results in faster sampling rates and low RAM usage comparable to hand-coded assembly.
“VisSim/ECD provides designers with the ability to develop an entire application based upon the C2834x controllers working only at the block diagram level while utilising the full performance of the C283xx,” said Andrew Soukup, C2000 Worldwide Marketing Manager for TI. “With this new offering, VSI allows any developer, even those without prior DSC experience, to quickly bring new products to market.”
VisSim/ECD v7.0 adds support for the increased RAM and clock speed as well as the additional CAP, SPI and floating point unit on the new C2834x controller series from TI. In addition, VisSim/ECD v7.0 adds general programming features such as:
- Automatic peripheral programming
- Easy selection of interrupts for graphical interrupt handler creation
- Stack and heap probe
- Check box enabled background thread scheduling
- State machine driven serial protocol handling
- Control sampling rates over 1MHz on C2834x parts
- Interrupt driven serial queue for SCI, I2C and SPI with user selectable queue length up to 255 bytes
- Low memory footprint uses as little as 750 words flash, 80 words RAM for PID control of a quadrature encoder sensed, PWM actuated closed loop control application
VisSim/ECD’s advanced feature set makes C and assembler programming a thing of the past. Systems designers who are unfamiliar with TI’s DSCs or hand coding can now take advantage of the simpler software development provided by the C2834x controllers, resulting in eliminating weeks – even months – of development time.
Dr Ziaur Rahman, Director of Electrical Controls at Electric Motion Systems, is using VisSim/ECD 7.0 to develop PMSM electric motor control using the TMS320F2801 controller from TI. According to Dr Rahman, “VisSim/ECD is an essential tool for us in developing vector motor controls for electric bicycles. Code development time is greatly reduced with VisSim/ECD’s ready-to-use block sets and efficient debugging capability.”
About Visual Solutions
Since 1989, VSI has been a pioneer in the development of Windows-based software for the modelling and simulation of dynamic systems and model based embedded development. VisSim is the winner of Electronic Design News Magazine’s Hot 100 New Technologies. VisSim software is easier to use and offers faster simulation speeds than competitive products.
About the Texas Instruments Developer Network
VSI is a member of the TI Developer Network, a community of respected, well-established companies offering products and services based on TI analogue and digital technology. The Network provides a broad range of end-equipment solutions, embedded software, engineering services and development tools that help customers accelerate innovation to make the World smarter, healthier, safer, greener and more fun.
The VisSim product range is supplied and supported by Adept Scientific in the UK, Ireland, Germany, Austria, Scandinavia and the Nordic countries.
With offices in the UK, Germany and throughout the Nordic region, Adept Scientific is one of the World’s leading suppliers of software and hardware products for research, scientific, engineering and technical applications on desktop computers. Full details and contact information for all Adept Scientific international offices are available at www.adeptscience.com; or telephone +44 (0) 203 695 7810.
What do our Customers say about us?
Thank you – again! Even those of us who do not like being the damsel in distress sometimes have need of knights in shining armour.SA, Bradford, UK
I had just upgraded to Windows 7, and after having Mathcad for several years I found that I could not complete the final stages of installation. After reading help files I finished up confused and really helpless, until I contacted you. THANK YOU.JD, Dorset, UK
Excellent – a natural teacher! Approachable and willing to help us individuallyPD, Manchester, UK
The training session has been invaluable. Your expertise and your patience are exemplary. It cannot be easy to teach a 75 year old new tricks but you have done so with the utmost understanding. The software is extraordinarily powerful: you have explained how to use it in simple and understandable terms.SF
For the time being we are unable to offer the following product ranges although we are currently working hard to increase the number of products we can offer in the future. Please contact us to talk about alternative products that we may be able to offer you.