Made-to-measure thermocouples and RTDs
Making it to the range of data acquisition products available from Adept Scientific (Letchworth, Herts) are Measurement Computing’s (Norton, MA), a leading manufacturer of low-cost data acquisition hardware and software, ready-made thermocouples and RTDs.
The ready-made thermocouples are available in 1- and 2m lengths, complete with measuring junction at one end, and are available in J, K, T and E-types.
Sealed in an Alumina tube with three Teflon-coated leads, the ready-made RTDs can measure up to 400oF (204oC). Resistant to abrasion and moisture, each RTD is sold individually and is also available in 1- and 2m lengths with a 3 wire, 100 Ohm.
Both these products can be trimmed should a shorter length be required.
The addition of thermocouples and RTDs to Adept’s extensive data acquisition range, together with their expertise, enables customers to service all their DAQ needs in one place saving time and energy in searching for each component.
Experts are on hand to advise on the best hardware/software combination for specific applications and help source the most cost-effective solution.
For more information about the range of thermocouples and RTDs on offer from Adept Scientific go to http://tinyurl.com/7tcpkg5.
About Measurement Computing
Measurement Computing is the market leader in the design, manufacture and distribution of low-priced data acquisition hardware and test and measurement software solutions for both programmers and non-programmers.
The Measurement Computing product range is supplied and supported in the UK by Adept Scientific.
With offices in the UK, Germany and throughout the Nordic region, Adept Scientific is one of the world’s leading suppliers of software and hardware products for research, scientific, engineering and technical applications on desktop computers. Full details and contact information for all Adept Scientific international offices are available at www.adeptscience.com; or telephone +44 (0) 203 695 7810.
What do our Customers say about us?
I am impressed – somebody actually cares enough about customer relations, not only to honour a promise to reply, but to remember the request! I hope your company appreciates you as much as I do.RE, London, UK
The new Quick Fit Gadget is fantastic and I absolutely love that I can output results to a worksheet so that I can get a column of a particular parameter on which I can do statistical analysis.Greg Scott, University of Illinois at Urbana-Champaign
Easy to book a place on the course, helpful staff at Adept. Very good introduction to the Endnote software, covered a wide range of topics. Knowledgeable on the Endnote program. Very helpful in answering any questions. Pace of learning was fine. Very good facilities.Ms N Calver, Manchester, UK
The training session has been invaluable. Your expertise and your patience are exemplary. It cannot be easy to teach a 75 year old new tricks but you have done so with the utmost understanding. The software is extraordinarily powerful: you have explained how to use it in simple and understandable terms.SF
For the time being we are unable to offer the following product ranges although we are currently working hard to increase the number of products we can offer in the future. Please contact us to talk about alternative products that we may be able to offer you.