Results 1 - 5 - 5.
|
Date Modified
|
Using the Datashuttle 54, 55, or 56, what is "Sample Duration" and how can I obtain a faster sample rate?
E The sample duration is the length of time during which the ADC samples each individual channel. It can be set to a different value for each channel. Longer durations will allow longer settling time, and provide an effective averaging which will reduce noise. The options are: 12.5ms, 20ms, 40ms, 11....
Using Digital and Frequency input modules in DASYLab with Datashuttle 50 series
2 When using either the digital input or frequency input modules in DASYLab with the Datashuttle 50 series devices the following error may occur when the worksheet is started: In order to use the digital and frequency input modules with the Datashuttle 50 series, at least 1 analogue input module mus....
How to install the Datashuttle 54 55 or 56 with DASYLab.
6 Here are complete installation instructions for using the Datashuttle 54 55 or 56 with DASYLab: 1. Download and install the main Datashuttle 50 series driver. This must be installed before attaching USB unit. The installer can be downloaded at the link below: ftp://ftp.mccdaq.com/downloads/iotech....
How to access the channels on the PDQ1 or PDQ2 expansion module for the DataShuttle 55 or 56?
E The PDQ module is not detected as a separate device. It appears as additional available channels on the host Datashuttle USB. If using PDaqView, check that the active device is selected by opening Active Devices from the View menu. Open Channel Configuration from the View menu and double click the....
Channels on the Datashuttle USB Input/Output modules in DASYLab must be defined in numerical order.
A Using the Personal DAQ driver for the Datashuttle USB in DASYLab, it is necessary to define channels in each Input/Output module in numerical order. This will occur by default, with the first module channel (0) being assigned channel 1. If channels are defined in a reverse numerical order, then th....
Results 1 - 5 - 5.
|
|
