Unable to AutoSync After Using CE-Wedge - Knowledge Base from Adept Scientific

Knowledge Base > Browse Categories > CE-Wedge

Unable to AutoSync After Using CE-Wedge

Email This Article

To email this article enter and address below and click on the "Email" Article button.

Last Modified:	3rd Jan 2013
Category:	Laboratory Applications > CE-Wedge
Platform:	All
Version:	1

Article Ref.:	86AA
»Return to previous search
»Print friendly version of this article.
1 person has found this article useful.

Unable to AutoSync After Using CE-Wedge

CE-Wedge should not conflict with the ActiveSync software in any way unless you have CEWedge running on the Pocket PC for the serial port that you want to use to connect with the ActiveSync software.

If you are using the serial cable to connect to ActiveSync, then you will need to either shut down CE-Wedge on the iPaq first or you need to select "None" for the serial port in CEWedge. You do not need to reset the Pocket PC in order to connect with ActiveSync.

Related Articles