DASYLab Error: "Device AI: A module cannot be loaded "

Last Modified: 3rd Jan 2013
Category: Data Acquisition > DASYLab
Platform: All
Version: All
Article Ref.: 13C92
»Return to previous search
»Print friendly version of this article.
1 person has found this article useful.

DASYLab 13C92 The problem results from the fact that although Measurement Computing DASYLab drivers are installed on the computer the actual hardware is not connected to it or configured in Instacal. To resolve this issue close DASYLab, connect the hardware to the computer, run Instacal and configure your hardware. Once your hardware is properly configured run DASYLab and open the saved worksheet. Error Messages DASYLab All All en All

If you can't find a solution on the Knowledge Base then please contact us on the Technical Support Request Form or by email or by telephone on +44 (0) 203 695 7810

For the time being we are unable to offer the following product ranges although we are currently working hard to increase the number of products we can offer in the future. Please contact us to talk about alternative products that we may be able to offer you.